- Kelvin Khng KY, Ettinger RL, Armstrong SR, Lindquist T, Gratton DG, Qian F. In vitro evaluation of the marginal integrity of CAD/CAM interim crowns. J Prosthet Dent. 2016; 115: 617-623.
- Alharbi N, Alharbi S, Cuijpers V, Osman RB, Wismeijer D. Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs. J Prosthodont Res. 2018; 62: 218-226.
- Ghoveizi R, Alikhasi M, Siadat MR, Siadat H, Sorouri M. A radiographic comparison of progressive and conventional loading on crestal bone loss and density in single dental implants: a randomized controlled trial study. J Dent (Tehran, Iran). 2013; 10: 155-163.
- Park JY, Jeong ID, Lee JJ, Bae SY, Kim JH, Kim WC. In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods. J Prosthet Dent. 2016; 116: 536-542.
- Güth JF, Almeida ESJS, Beuer FF, Edelhoff D. Enhancing the predictability of complex rehabilitation with a removable CAD/CAM-fabricated long-term provisional prosthesis: a clinical report. J Prosthet Dent. 2012; 107: 1-6.
- Patras M, Naka O, Doukoudakis S, Pissiotis A. Management of provisional restorations' deficiencies: a literature review. J Esthet Restor Dent. 2012; 24: 26-38.
- Haselton DR, Diaz-Arnold AM, Vargas MA. Flexural strength of provisional crown and fixed partial denture resins. J Prosthet Dent. 2002; 87: 225-228.
- Digholkar S, Madhav VN, Palaskar J. Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods. J Indian Prosthodont Soc. 2016; 16: 328-334.
- Revilla-León M, Meyers MJ, Zandinejad A, Özcan M. A review on chemical composition, mechanical properties and manufacturing work flow of additively manufactured current polymers for interim dental restorations. J Esthet Restor Dent. 2019; 31: 51-57.
- Regish KM, Sharma D, Prithviraj DR. Techniques of fabrication of provisional restoration: an overview. Int J Dent. 2011; 2011: 134659.
- Kim SH, Watts DC. Polymerization shrinkage-strain kinetics of temporary crown and bridge materials. Dent Mater. 2004; 20: 88-95.
- Syed M, Chopra R, Sachdev V. Allergic reactions to dental materials- a systematic review. J Clin Diagn Res. 2015; 9: Ze04-Ze09.
- Michalakis K, Pissiotis A, Hirayama H, Kang K, Kafantaris N. Comparison of temperature increase in the pulp chamber during the polymerization of materials used for the direct fabrication of provisional restorations. J Prosthet Dent. 2006; 96: 418-423.
- Mino T, Maekawa K, Ueda A, Higuchi S, Sejima J, Takeuchi T, et al. In silico comparison of the reproducibility of full-arch implant provisional restorations to final restoration between a 3D Scan/ CAD/ CAM technique and the conventional method. J Prosthodont Res. 2015; 59: 152-158.
- Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008; 204: 505-511.
- Alharbi N, Osman R, Wismeijer D. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations. J Prosthet Dent. 2016; 115: 760-767.
- Fahad M, Dickens P, Gilbert M. Novel polymeric support materials for jetting based additive manufacturing processes. Rapid Prototyp J. 2013; 19: 230-239.
- Alghazzawi TF. Advancements in CAD/CAM technology: Options for practical implementation. J Prosthodont
Res. 2016; 60: 72-84.
- Earar K, Iliescu AA, Popa G, Iliescu A, Rudnic I, Feier R, et al. Additive vs. Subtractive CAD/CAM Procedures in Manufacturing of the PMMA Interim Dental Crowns. A Comparative in vitro Study of Internal Fit. Rev Chim. 2020; 71: 405-410.
- Van*Noort R. The future of dental devices is digital. Dent Mater. 2012; 28: 3-12.
- Shamseddine L, Mortada R, Rifai K, Chidiac JJ. Marginal and internal fit of pressed ceramic crowns made from conventional and computer-aided design and computer-aided manufacturing wax patterns: An in vitro J Prosthet Dent. 2016; 116: 242-248.
- Rayyan MM, Aboushelib M, Sayed NM, Ibrahim A, Jimbo R. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. J Prosthet Dent. 2015; 114: 414-419.
- Fuster-Torres MA, Albalat-Estela S, Alcañiz-Raya M, Peñarrocha-Diago M. CAD/CAM dental systems in implant dentistry: update. Med Oral Patol Oral Cir Bucal. 2009; 14: E141-E145.
- Örtorp A, Jönsson D, Mouhsen A, Vult von Steyern P. The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro Dent Mater. 2011; 27: 356-363.
- Azari ANS. The evolution of rapid prototyping in dentistry: A review. Rapid Prototyp J. 2009; 15: 216-225.
- Torabi K, Farjood E, Hamedani S. Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature. J Dent (Shiraz, Iran). 2015; 16: 1-9.
- Apparatus for production of three dimensional objects by stereolithography, US patent 4.575.330 (1986). Available at: https://patentimages.storage.googleapis.com/5c/a0/27/ e49642dab99cf6/US4575330.pdf.
- Sun J, Zhang FQ. The application of rapid prototyping in prosthodontics. J Prosthodont. 2012; 21: 641-644.
- Lee JH. Accelerated techniques for a post and core and a crown restoration with intraoral digital scanners and CAD/CAM and rapid prototyping. J Prosthet Dent. 2014; 112: 1024-1029.
- Salmi M, Paloheimo KS, Tuomi J, Wolff J, Mäkitie A. Accuracy of medical models made by additive manufact-uring (rapid manufacturing). J Craniomaxillofac Surg. 2013; 41: 603-609.
- Lima JMC, Anami LC, Araujo RM, Pavanelli CA. Removable Partial Dentures: Use of Rapid Prototyping. J Prosthodont. 2014; 23: 588-591.
- Reyes A, Turkyilmaz I, Prihoda TJ. Accuracy of surgical guides made from conventional and a combination of digital scanning and rapid prototyping techniques. J Prosthet Dent. 2015; 113: 295-303.
- Salmi M, Paloheimo KS, Tuomi J, Ingman T, Mäkitie A. A digital process for additive manufacturing of occlusal splints: a clinical pilot study. J R Soc Interface. 2013; 10: 20130203.
- Revilla-León M, Özcan M. Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry. J Prosthodont. 2019; 28: 146-158.
- Alharbi N, Osman R, Wismeijer D. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations. J Prosthet Dent. 2016; 115: 760-767.
- Alharbi N, Osman RB, Wismeijer D. Factors Influencing the Dimensional Accuracy of 3D-Printed Full-Coverage Dental Restorations Using Stereolithography Technology. Int J Prosthodont. 2016; 29: 503-510.
- Reymus M, Fabritius R, Keßler A, Hickel R, Edelhoff D, Stawarczyk B. Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing and artificial aging-an in vitro Clin Oral Investig. 2020; 24: 701-710.
- Groth C, Kravitz ND, Jones PE, Graham JW, Redmond WR. Three-dimensional printing technology. J Clin Orthod. 2014; 48: 475-485.
- Stansbury JW, Idacavage MJ. 3D printing with polymers: Challenges among expanding options and opportunities. Dent Mater. 2016; 32: 54-64.
- Li X, Xie B, Jin J, Chai Y, Chen Y. 3D Printing Temporary Crown and Bridge by Temperature Controlled Mask Image Projection Stereolithography. Procedia Manuf. 2018; 26: 1023-1033.
- Berman B. 3-D printing: The new industrial revolution. Bus Horiz. 2012; 55: 155-162.
- Barazanchi A, Li KC, Al-Amleh B, Lyons K, Waddell JN. Additive Technology: Update on Current Materials and Applications in Dentistry. J Prosthodont. 2017; 26: 156-163.
- Kang SY, Park JH, Kim JH, Kim WC. Accuracy of provvisional crowns made using stereolithography apparatus and subtractive technique. J Adv Prosthodont. 2018; 10: 354-360.
- Mai HN, Lee KB, Lee DH. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017; 118: 208-215.
- McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo Br Dent J. 1971; 131: 107-111.
- Dikova T, Dzhendov D, Katreva I, Pavlova D, Simov M, Angelova S, et al. Possibilities of 3D printer Rapidshape D30 for manufacturing of cubic samples. Scr Sci Med Dent. 2016; 2: 43-49.
- Bliznakova K.The use of 3D printing in manufacturing anthropomorphic phantoms for biomedical applications. Scr Sci Med Dent. 2016; 2: 23.
- Braian M, Jimbo R, Wennerberg A. Production tolerance of additive manufactured polymeric objects for clinical applications. Dent Mater. 2016; 32: 853-861.
- Minev R, Minev E. Technology for rapid prototyping (RP)- basic concepts, quality issues and modern trends. Scr Sci Med Dent. 2016; 2: 29-39.
- Plooij JM, Maal TJ, Haers P, Borstlap WA, Kuijpers-Jagtman AM, Bergé SJ. Digital three-dimensional image fusion processes for planning and evaluating orthodontics and orthognathic surgery. A systematic review. Int J Oral Maxillofac Surg. 2011; 40: 341-352.
- Dikova TD, Dzhendov DA, Ivanov I, Bliznakova K. Dimensional accuracy and surface roughness of polymeric dental bridges produced by different 3D printing processes. Arch Mater Sci Eng. 2018; 94: 65-75.
- On the Computation Of Part Orientation Using Support Structures in Layered Manufacturing. Austin, TX, Proceeding of the solid freedom fabrication symposium, 1994. p. 259-269. Available at: https://repositories.lib. utexas.edu/handle/2152/68653.
- Kim DY, Jeon JH, Kim JH, Kim HY, Kim WC. Reproducibility of different arrangement of resin copings by dental microstereolithography: Evaluating the marginal discrepancy of resin copings. J Prosthet Dent. 2017; 117: 260-265.
- Malara PCZ, Swiderski W. Degree of conversion of dental composite materials in relation to different light-curing
parameters. J Achiev Mater Manuf. 2015: 63: 60-69.
- Dikova T, Dzhendov D, Katreva I, Pavlova D. Accuracy of polymeric dental bridges manufactured by stereolythography. Arch Mater Sci Eng. 2016; 78: 29-36.
- Andersen UV, Pedersen DB, Hansen HN, Nielsen JS. Inprocess 3D geometry reconstruction of objects produced by direct light projection. Int J Adv Manuf Technol. 2013; 68: 565-573.
- Yao J, Li J, Wang Y, Huang H. Comparison of the flexural strength and marginal accuracy of traditional and CAD/CAM interim materials before and after thermal cycling. J Prosthet Dent. 2014;112(3):649-57.
- Choi JW. Marginal and internal discrepancy of 3-unit fixed dental prostheses fabricated by subtractive and additive manufacturing. J Korean Acad Prosthodont. 2020; 58: 7-13.
- Ide Y, Nayar S, Logan H, Gallagher B, Wolfaardt J. The effect of the angle of acuteness of additive manufactured models and the direction of printing on the dimensional fidelity: clinical implications. Odontology. 2017; 105: 108-115.
- Liu Q, Leu MC, Schmitt SM. Rapid prototyping in dentistry: technology and application. Int J Adv Manuf Technol. 2006; 29: 317-335.
- Tahayeri A, Morgan M, Fugolin AP, Bompolaki D, Athirasala A, Pfeifer CS, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater. 2018; 34: 192-200.
- Waltimo A, Könönen M. Maximal bite force and its association with signs and symptoms of craniomandibular disorders in young Finnish non-patients. Acta Odontol Scand. 1995; 53: 254-258.
- Park SM, Kim SK, Park J, Kim JH, Jeon YT, Koak JY, et al. Flexural strength of various kinds of the resin bridges fabricated with 3D printing. J Dent Rehabil Appl Sci. 2017; 33: 260-268.
- Cho WT, Choi J. Comparison analysis of fracture load and flexural strength of provisional restorative resins fabricated by different methods. J Korean Acad Prosthodont. 2019; 57: 225-231.
- Donovan TE, Hurst RG, Campagni WV. Physical properties of acrylic resin polymerized by four different techniques. J Prosthet Dent. 1985; 54: 522-524.
- Ahn J, Huh JB, Choi JW. In vitro evaluation of the wear resistance of provisional resin materials fabricated by different methods. J Korean Acad Prosthodont. 2019; 57: 110-117.
- Alt V, Hannig M, Wöstmann B, Balkenhol M. Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations. Dent Mater. 2011; 27: 339-347.
- Park JM, Ahn JS, Cha HS, Lee JH. Wear Resistance of 3D Printing Resin Material Opposing Zirconia and Metal
Antagonists. Materials (Basel). 2018; 11: 1043.
- Gallucci GO, Grütter L, Nedir R, Bischof M, Belser UC. Esthetic outcomes with porcelain-fused-to-ceramic and all-ceramic single-implant crowns: a randomized clinical trial. Clin Oral Implants res. 2011; 22: 62-69.
- Revilla-León M, Umorin M, Özcan M, Piedra-Cascón W. Color dimensions of additive manufactured interim restorative dental material. J Prosthet Dent. 2020; 123: 754-760.
- Dimitrov D, Schreve K, Beer ND. Advances in three dimensional printing state of the art and future perspectives. Rapid Prototyp J. 2006; 12: 136-147.
- Osman RB, Alharbi N, Wismeijer D. Build Angle: Does It Influence the Accuracy of 3D-Printed Dental Restorations Using Digital Light-Processing Technology? Int J Prosthodont. 2017; 302: 182-188.
- Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010; 31: 6121-630.
- Pandey PM, Reddy N, Dhande S. Slicing procedures in layered manufacturing: a review. Rapid Prototyp J. 2003; 9: 274-288.
- Anusavice KSC, Rawls R. Phillips' Science of Dental Materials. 12th ed. Saunders: Philadelphia; 2013. p. 531-532.
- Reeves P. Additive manufacturing- A supply chain wide response to economic uncertainty and environmental sustainability. 1st ed. Derbyshire UK, Econolyst Ltd: The Silversmiths; 2009. p. 12-45.
- Petrovic V, Vicente Haro Gonzalez J, Jordá Ferrando O, Delgado Gordillo J, Ramón Blasco Puchades J, Portolés Griñan L. Additive layered manufacturing: sectors of industrial application shown through case studies. Int J Prod Res. 2011; 49: 1061-1079.
- Hoang LN, Thompson GA, Cho SH, Berzins DW, Ahn KW. Die spacer thickness reproduction for central incisor crown fabrication with combined computer-aided design and 3D printing technology: an in vitro J Prosthet Dent. 2015; 113: 398-404.
- Grajower R, Zuberi Y, Lewinstein I. Improving the fit of crowns with die spacers. J Prosthet Dent. 1989; 61: 555-563.
- Sugavaneswaran M, Arumaikkannu G. Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure. Mater Des. 2015; 66: 29-36.
- Stawarczyk B, Ender A, Trottmann A, Özcan M, Fischer J, Hämmerle CH. Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens. Clin Oral Investig. 2012; 16: 1669-1677.
- Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. J Adv Prosthodont. 2017; 9: 265-270.
- Inventor Quantum dot ink composition for inkjet printing and electronic device using the same U.S.Patent No. 8,765,014. 1 Jul. 2014. Available at: https://patents. google.com/patent/US20090314991A1/en.
- Rosenstiel SFLM, Fujimoto J. Contemporary fixed prosthodontics. 5th ed. Mosby Elsevier Inc: Louis; 2016. p. 401-442.
- Garoushi SK, Vallittu PK, Lassila LV. Short glass fiber-reinforced composite with a semi-interpenetrating polymer network matrix for temporary crowns and bridges. J Contemp Dent Pract. 2008; 9: 14-21.
- Gömeç Y, Dörter C, Dabanoglu A, Koray F. Effect of resin-based material combination on the compressive and the flexural strength. J Oral Rehab. 2005; 32: 122-127.
|
