پیوندهای مفید
آمار
| تعداد نشریات | 20 |
| تعداد شماره‌ها | 1,149 |
| تعداد مقالات | 10,519 |
| تعداد مشاهده مقاله | 45,427,849 |
| تعداد دریافت فایل اصل مقاله | 11,296,970 |
Shear Bond Strength of Zirconia Ceramic to Four Different Core Materials, An in vitro Study | ||
| Journal of Dentistry | ||
| مقاله 10، دوره 22، شماره 2 - شماره پیاپی 71، شهریور 2021، صفحه 138-143 اصل مقاله (347.51 K) | ||
| نوع مقاله: Original Article | ||
| شناسه دیجیتال (DOI): 10.30476/dentjods.2020.86215.1176 | ||
| نویسندگان | ||
| Sara Tavakolizadeh1؛ Mohamad Dehghan1؛ Rahab Ghoveizi1؛ Anahita Fayyazi* 2 | ||
| 1Dept. of Prosthodontics, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran, Iran. | ||
| 2Post Graduate Student of Prosthodontics, Dept. of Prosthodontics, School of Dentistry, Shahid Beheshti University of Medical Sciences, Tehran, Iran. | ||
| چکیده | ||
| Statement of the Problem:Different materials can be used to reconstruct the core foundation in all-ceramic restorations. Bond strength of the core material to zirconia is an important factor in long-term restoration success. Purpose: The aim of this study was to assess shear bond strength (SBS) of zirconia to four different core materials. Materials and Method: In this experimental in vitro study, 40 zirconia ceramic disks (10×3 mm) were prepared and divided to four groups based on core material. Cylinder shaped core specimens (3×4 mm) of non-precious gold alloy (NPG), zirconia ceramic, natural dentin, and composite resin were prepared and bonded perpendicularly to the zirconia disks using Gillmore Needle Apparatus and dual cure resin cement. All samples were thermocycled for 2000 cycles. To evaluate SBS, the specimens were tested by universal testing machine. Data were analyzed using Kruskal-Wallis test followed by Dunn's test with Bonferroni correction. Statistical significance was set at p < 0.05. Results: The highest values for SBS were achieved in composite resin group (11.58±1.74 MPa) followed by NPG (10.32±0.94 MPa), zirconia (7.3±1.11 MPa) and dentin group (6.53±0.56 MPa). SBS in composite resin and NPG core materials were significantly higher than other core materials (p < 0.05). Conclusion: Composite resin and NPG cores showed significant higher bond strength to zirconia in comparison to dentine and zirconia core materials. | ||
| کلیدواژه‌ها | ||
| Composite Resins؛ CoreRestore؛ Shear Strength؛ Yttria Stabilized Tetragonal Zirconia | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] Bello A, Jarvis RH. A review of esthetic alternatives for the restoration of anterior teeth. J Prosthet Dent. 1997; 78: 437-440.
[2] Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent. 2004; 92: 557-562.
[3] Song KH, Im YW, Lee JH, Lee J, Lee HH. Evaluation of mold-enclosed shear bond strength between zirconia core and porcelain veneer. Dent Mater J. 2018; 37: 783-788.
[4] Frattes F, Oliveira JBS, Pucci C, Borges A, Torres C. Bond Strength of Zirconia to Different Core Materials. World J Dent. 2016; 7: 169-174.
[5] Khiavi H, Habibzadeh S, Safaeian S, Eftekhar M. Fracture Strength of Endodontically treated Maxillary Central Incisors restored with Nickel Chromium and Nonprecious Gold Alloy Casting Post and Cores. J Contemp Dent Pract. 2018; 19: 560-567.
[6] Bittner N, Hill T, Randi A. Evaluation of a one-piece milled zirconia post and core with different post-and-core systems: An in vitro study. J Prosthet Dent. 2010; 103: 369-379.
[7] Abduljabbar T, Sherfudhin H, AlSaleh SA, Al-Helal AA, Al-Orini SS, Al-Aql NA. Fracture resistance of three post and core systems in endodontically treated teeth restored with all-ceramic crowns. King Saud University Journal of Dental Sciences. 2012; 3: 33-38.
[8] Kajihara H, Suzuki S, Minesaki Y, Kurashige H, Tanaka T. Effect of filler loading on resin cement bonding to sila-nized buildup composites. Am J Dent. 2005; 18: 109-112.
[9] O'Keefe KL, Powers JM. Adhesion of resin composite co-re materials to dentin. Int J Prosthodont. 2001;14:451-456.
[10] Rüttermann S, Alberts I, Raab WH, Janda RR. Physical properties of self-, dual-, and light-cured direct core materials. Clin Oral Investig. 2011; 15: 597-603.
[11] Tauböck TT, Bortolotto T, Buchalla W, Attin T, Krejci I. Influence of light-curing protocols on polymerization shrinkage and shrinkage force of a dual-cured core build-up resin composite. Eur J Oral Sci. 2010; 118: 423-429.
[12] Vidotti HA, Pereira JR, Insaurralde E, Placa LF, Delben JR, do*Valle AL. Influence of thermal and mechanical fatigue on the shear bond strength of different all-ceramic systems. Clin Exp Dent Res. 2017; 9: e952-e957.
[13] Amaral R, Özcan M, Valandro LF, Bottino MA. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent Mater J. 2006; 22: 283-290.
[14] Valandro LF, Özcan M, Bottino MC, Bottino MA, Scotti R, Della*Bona A. Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning. J Adhes Dent. 2006; 8: 175-181.
[15] Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J Biomed Mater Res B: Appl Biomater. 2006; 77: 28-33.
[16] Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater J. 2007; 23: 45-50.
[17] Al-Harbi FA, Ayad NM, Khan ZA, Mahrous AA, Morgano SM. In vitro shear bond strength of Y-TZP ceramics to different core materials with the use of three primer/ resin cement systems. J Prosthet Dent. 2016; 115: 84-89.
[18] Matinlinna JP, Heikkinen T, Ozcan M, Lassila LV, Vallittu PK. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater. 2006; 22: 824-831.
[19] Yoshida K, Tsuo Y, Atsuta M. Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler. J Biomed Mater Res Part B Appl Biomater. 2006; 77: 28-33.
[20] De Souza G, Hennig D, Aggarwal A, Tam L. The use of MDP-based materials for bonding to zirconia. J Prosthet Dent. 2014; 112: 895-902.
[21] Adatia N, Bayne S, Cooper L, Thompson J. Fracture Resistance of Yttria-Stabilized Zirconia Dental Implant Abutments. J Prosthodont. 2009; 18: 17-22.
[22] Tan PL, Dunne JT Jr. An esthetic comparison of a metal ceramic crown and cast metal abutment with an all-ceramic crown and zirconia abutment: a clinical report. J Prosthet Dent. 2004; 91: 215-218.
[23] Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent. 2006; 95: 430-436.
[24] Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent. 2003; 89: 268-274.
[25] Derand T, Molin M, Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater. 2005; 21: 1158-1162.
[26] Kern M, Thompson VP. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent. 1995; 73: 240-249.
[27] Kulunk S, Kulunk T, Ural C, Kurt M, Baba S. Effect of air abrasion particles on the bond strength of adhesive resin cement to zirconia core. Acta Odontol Scand. 2011; 69: 88-94.
[28] Matinlinna JP, Lassila LV, Vallittu PK. Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system. Acta Odontol Scand. 2007; 65: 44-51.
[29] Nagayassu MP, Shintome LK, Uemura ES, Araujo JE. Effect of surface treatment on the shear bond strength of a resin-based cement to porcelain. Braz Dent J. 2006; 17: 290-295.
[30] Ozcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003; 19: 725-731.
[31] Sen D, Poyrazoglu E, Tuncelli B, Goller G. Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores. J Prosthet Dent. 2000; 83: 210-215.
[32] Tsukakoshi M, Shinya A, Gomi H, Lassila LV, Vallittu PK, Shinya A. Effects of dental adhesive cement and surface treatment on bond strength and leakage of zirconium oxide ceramics. Dent Mater J. 2008; 27: 159-171.
[33] Jiao Y, Wang JD, Deng JP. Effect of different surface treatments on the crystal structure and properties of zirconia. Beijing Da Xue Xue Bao. 2018; 50: 49-52.
[34] Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, Schmalz G. Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel. Clin Oral Investig. 2005; 9: 161-167.
[35] Pashley DH, Carvalho RM. Dentine permeability and dentine adhesion. J Dent. 1997; 25: 355-372.
[36] Akgungor G, Sen D, Aydin M. Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent. 2008; 99: 388-399.
[37] Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater. 1998; 14: 64-71.
[38] Tanaka R, Fujishima A, Shibata Y, Manabe A, Miyazaki T. Cooperation of Phosphate Monomer and Silica Modification on Zirconia. J Dent Res. 2008; 87: 666-670. | ||
|
آمار تعداد مشاهده مقاله: 3,624 تعداد دریافت فایل اصل مقاله: 2,746 |
||
