پیوندهای مفید
آمار
| تعداد نشریات | 20 |
| تعداد شمارهها | 1,149 |
| تعداد مقالات | 10,518 |
| تعداد مشاهده مقاله | 45,416,269 |
| تعداد دریافت فایل اصل مقاله | 11,292,120 |
Effect of Shade and Light Curing Mode on the Degree of Conversion of Silorane-Based and Methacrylate-Based Resin Composites | ||
| Journal of Dental Biomaterials | ||
| مقاله 1، دوره 3، شماره 4، بهمن 2016 اصل مقاله (372.25 K) | ||
| نوع مقاله: Original Article(s) | ||
| نویسندگان | ||
| Sayed-Mostafa Mousavinasab1؛ Mohammad Atai2؛ Negar Salehi3؛ Arman Salehi* 4 | ||
| 1Dental Materials Research Center and Department of Operative Dentistry, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran | ||
| 2Department of Polymer Science, Iran Polymer and Petrochemical Institute, Tehran, Iran | ||
| 3Department of Oral Medicine, School of Dentistry, Rafsanjan University of Medical Sciences, Rafsanjan, Iran | ||
| 4Department of Operative Dentistry, School of Dentistry, Rafsanjan University of Medical Sciences, Rafsanjan, Iran | ||
| چکیده | ||
| Statement of Problem: The degree of conversion depends on the material composition, light source properties, distance from light source, light intensity, curing time, and other factors such as shade and translucency.Objectives: In the present study, we evaluated the effects of different light- curing modes and shades of methacrylate and silorane-based resin composites on the degree of conversion of resin composites (DC).Materials and Methods: The methacrylate-based (Filtek Z250, 3M, ESPE) and low-shrinkage silorane-based (Filtek P90, 3M, ESPE) resin composites were used in three groups as follows: group 1-Filtek Z250 (shade A3), group 2-Filtek Z250 (shade B2), and group 3-Filtek P90 (shade A3). We used a light-emitting diode (LED) curing unit for photopolymerization. 10 samples were prepared in each group to evaluate the degree of conversion; 5 samples were cured using soft-start curing mode, and the other 5 were cured using standard curing mode. The DC of the resin composites was measured using Fourier Transform Infrared Spectroscopy (FTIR). The data were analyzed using Kruskal Wallis and one- way ANOVA statistical tests.Results: The degree of conversion of silorane-based resin composite was 70- 75.8% and that of methacrylate-based resin composites was 60.2 - 68.2% (p = 0.009). The degree of conversion of the composite with brighter colour (B2) was statistically more than the darker composite (A3). Higher degree of conversion was achieved applying the standard curing mode.Conclusions: The results of the study showed that the colour and type of theresin composite and also the curing mode influence the degree of conversion ofresin composites.Key words: Degree of Conversion, Methacrylate-Based Resin Composites, Silorane-Based Resin Composites, Soft-Start Curing | ||
|
آمار تعداد مشاهده مقاله: 866 تعداد دریافت فایل اصل مقاله: 57 |
||