LinkedIn

 آمار

تعداد نشریات20
تعداد شماره‌ها1,149
تعداد مقالات10,518
تعداد مشاهده مقاله45,416,279
تعداد دریافت فایل اصل مقاله11,292,127
Sharafeddin, Farahnaz, Shoaleh, Soodabe. (1396). Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin. سامانه مدیریت نشریات علمی, 19(1), 48-56. doi: 10.30476/dentjods.2018.41791
Farahnaz Sharafeddin; Soodabe Shoaleh. "Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin". سامانه مدیریت نشریات علمی, 19, 1, 1396, 48-56. doi: 10.30476/dentjods.2018.41791
Sharafeddin, Farahnaz, Shoaleh, Soodabe. (1396). 'Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin', سامانه مدیریت نشریات علمی, 19(1), pp. 48-56. doi: 10.30476/dentjods.2018.41791
Sharafeddin, Farahnaz, Shoaleh, Soodabe. Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin. سامانه مدیریت نشریات علمی, 1396; 19(1): 48-56. doi: 10.30476/dentjods.2018.41791

Effects of Universal and Conventional MDP Primers on the Shear Bond Strength of Zirconia Ceramic and Nanofilled Composite Resin

Journal of Dentistry
مقاله 8، دوره 19، شماره 1، خرداد 2018، صفحه 48-56    اصل مقاله (698.56 K)
نوع مقاله: Original Article
شناسه دیجیتال (DOI): 10.30476/dentjods.2018.41791
نویسندگان
Farahnaz Sharafeddin1؛ Soodabe Shoaleh* 2
1Biomaterials Research Center, Dept. of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran.
2Postgraduate Student, Dept. of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran.
چکیده
Statement of the Problem: The clinical success of ceramic depends on the quality of the bond between the zirconia and resin cement.Purpose: In the present study, the effects of universal and conventional MDP-containing primers were evaluated on the shear bond strength of zirconia ceramic and nanofilled composite resin.Materials and Method: Thirty blocks of zirconia ceramic (6mm×2mm) were prepared. Then the inner surfaces were air-abraded and divided into three groups (n= 10) as follows: untreated with primer (control group, I); All- Bond Universal (group II) and Z-Prime Plus (group III). The specimens in each group were bonded with Variolink N cement to cylinders of composite resin Z350XT. After 24 hour water storage, the shear bond strength test was performed with a universal testing machine at a crosshead speed of 1mm/ min and bond strength values (MPa) were calculated and analyzed with one-way ANOVA and post hoc Tukey tests (p< 0.05). The failure mode of each specimen was evaluated under a stereomicroscope and representative specimens were analyzed by scanning electron microscopy (SEM).Results: The mean shear bond strength values (MPa) were 7.58±1.62, 17.51±1.34 and 22.45±3.60 in groups I, II and III, respectively. These results indicated that the shear bond strength were significantly higher in groups II and III compared to the control group (p< 0.001). Chemical pre-treatment of zirconia with Z- Prime Plus revealed significantly higher bond strength than the All-Bond Universal adhesive (p< 0.002). All the failure modes were adhesive in the control group (I) and when using primer treatment, mixed failures occurred in 40% and 50% of specimens in groups II and III, respectively.Conclusion: Treatment with both primers resulted in higher bond strength values compared to the control group. The use of Z-Prime Plus treatment in combination with air-abrasion procedure resulted in the highest bond strength. Keywords ● Zirconia  ● Strength  ● Adhesives  ● Primer  ● Composite
آمار
تعداد مشاهده مقاله: 1,057
تعداد دریافت فایل اصل مقاله: 505


سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب